| The product is the new saving-energy switch adopted
the good sensitivity detector, integrated circuit and SMT. It gathers
automatism, convenient safe, sawing-energy and practical functions.
Three detectors inside compose a wide range detection field, they
utilize the infrared energy from human as control-signal source to
start the load at once when human enter detection field. And they
can identify day and night automatically. It is easy to install and
used widely, possessing the power show and detecting show functions. |
| |
PDF:  Size:64KB
Download Acrobat: 
|
| Power source: |
220V/AC-240V/AC 100V/AC-130V/AC |
| Power frequency: |
50~60Hz |
| Ambient light: |
<3LUX-daylight |
| Time-delay: |
min: 8+/-3sec max: 7+/-2min |
| Rated load: |
1200W (220-240V/AC) 800W (110V/AC)
3000W(220-240V/AC)
1500W (110V/AC) |
| Detection motion speed: |
0.6-1.5m/s |
| Detection range: |
360 |
| Detection distance: |
12m max(<24 ) |
| Working temperature: |
-20C~40C |
| Working humidity: |
<93%RH |
| Installation height: |
1.5-3.5m |
| Power consumption: |
0.45W(static 0.1W) |
| Switch Function: |
Auto/Off/Manual Override |
|
| |
|
Identify day and night automatically. Can adjust ambient light according
to your desire: when turn to SUN (max), it
will work day and night. When turn to MOON (min), it will only work
under less than 3LUX circumstance. As for
Adjustment, please refer to testing.
Detection distance can be set according to installation position and
detection field.
The power show and detection show: they will flash one time each 4
seconds after putting through the power, and
flash two times per second when receiving the signal. At the same
time, it shows the sensor in the normal conditions
for detection.
Time-delay added continually: when it received the second induction
signal after the first inductor, you should
compute time once more on the rest of the first time-delay basic.
(Set time)
Time-delay adjustment: it can be set according to your desire. The
minimum is 8+/-3 sec; the maximum is 7+/- 1min.
Locking function: during working, sensor will keep load lighting
when power is shutted off 2 seconds and then on. And shut off the
power for 4 seconds and then on, sensor will resume automation. |
 |
| |
|
