Home DSW.Profile Products QualityControl R&D Section Inquiry Managment OEM/ODM
  Path: Home >> Products >> Sensor & Detector >> Digital Glassbreak
 
 
Model No.: PS-372
Digital Processor: 8 bits 8MHz microprocessor
Sensitivity Adjust: Continuously adjustable by variable resistor
Coverage: 8m distance
Mounting: Ceiling or wall mounted, near to or opposite to the glass
Interference Rejection: RFI/EMI filtering with SMD technology
Wi
 
 
Model No.: PS-971
Sensor: Photo semiconductor shock sensor
Processor: Microprocessor controlled
Alarm Relay Output: Normally closed contact, opens on alarm
Alarm Relay Rating: 100mA 12V, 30 ohm resistor in series
Sensitivity Setting: Manual setting: by rotary VR setting continuously
 
   
 
Model No.: LS-200
Sensor: Mass inertia shock sensor module
Alarm Output: Normally closed, opens on alarm
Contact: 24K gold plated 24K
Sensitivity Setting: 4 levels
Operating Temperature: -20 to 500C
Casing: Plastic(white or brown in color)
Dimension: 49x28x23 mm
 
 
Model No.: IS70S
Operating voltage: 12VDC
Operating voltage Max.:60VDC
Operating current Max.20mA
Operating current Min.10mA
Pulse output time: 0.5mS-50mS
Sensibility adjustable: high, medium, low
Use with 971A, strong detection ability, long-frequency vibration and shock
 
   
 
Model No.: PS-5150
3m radius of coverage measured from the sensor-Must be installed on Framed Glass
Protects all glass types up to a standard thickness of 6.4 mm including plate, wired, tempered and laminated glass
Ideal for 24-hours loop protection
Two wire sensor, drawing no power from the lo
 
   
 
Address: Rm1301-1302 No.5 Oriental Commercial Center,Xingning road, Ningbo City,Zhejiang, China
Tel: +86(574) 27861829   27861849   27861830   Fax: +86(574)87264906
E-mail: sales@dswbrand.com
 HTTP://WWW.DSW brand.COM
Copyright ©1995-2003 DSW Electronics Ltd. All rights reserved.