This product is a new energy-saving lighting Switch,
adopted two high sensitivity detector, integrated circuit, SMT technology;
it gathers the functions of automatism, convenience, safety, energy
saving, etc. The wide detection are comprised by right and left two
services field, which utilizing body infrared rays as signal control
source to star the load when body enter detection field the sensor
cans identity day and night automatically. It is used widely and easy
to install with the power and detection show functions. |
|
PDF: Size:204KB Download Acrobat:
|
Power source: |
220V/AC~240V/AC 110V/AC~240V/AC |
Power frequency: |
50~60Hz 800W |
Light-control: |
<3LUX~sunshine light |
Working time: |
min: 8sec 3sec max: 7min 2min |
Rated load: |
1200W (220V/AC~240V/AC) 800W (110V/AC~130V/AC) 3000W(220V/AC~240V/AC)
1500W(110V/AC~130V/AC) |
Detection motion speed: |
0.6~1.5m/s |
Detection range: |
270degree |
Detection distance: |
11m max(<24 ) |
Working temperature: |
-20C~40C |
Working humidity: |
<93%RH |
Installation height: |
1.5m~2.5m |
Power consumption: |
0.45W(static 0.1W) |
|
|
The detection distance can be adjusted: The detection distance
is near if you press down the switch, otherwise it is far;
Can identify day and night automatically: The ambient light of
working of LX48A.B can be adjusted freely, when you turn it to the
sunshine (largest), it can work day and night while it can only
work in the circumanstance less than 3LUX, If you turn it to moon
(smallest). Please refer to the testing way about the adjustment
Power and detection indication: The indicator lamp flash one
time each 4sec after switching on the power, it can flash 2 times
each 1sec after receiving the Induction signals. So it can show
if the detector and power is normal;
Time-delay added continually: When it receives the second induction
signals after the first, it should compute time oncemore on the
rest of the first time-delay basis.
Time-delay adjustment: The working time-delay can be adjusted
according to the customer desire, the minimums time 8sec 3sec,the
maximum is 7min 2min.
Locking function: during working, sensor will keep load lighting
when power is shutted off 2 seconds and then on. And shut off the
power for 4 seconds and then on, sensor will resume automation. |
|
|